Smaart Users

If you are a user of Smaart sound system measurement, optimization and control software then you need to be in this group.

Members: 106
Latest Activity: Jan 27

Discussion Forum

This group does not have any discussions yet.

Comment Wall


You need to be a member of Smaart Users to add comments!

Comment by Stephen Kamin on September 4, 2013 at 12:11pm

I went with a DBX RTA-M... I have a couple of friends using it and it seemed to work for them... I like it, it helps on my smaller bar gigs...

Comment by Tiago Borges on September 4, 2013 at 12:02pm

Hi Guys, what are your setup of measurement?

The my setup is:

- One board Focusrite 18i6;
- One mic Behringer ECM8000;
- One generator of noise Phonic PAA3;
- One splitter cable of 12 ways for links of six way outputs (processor), one reference (Phonic) and one mic.

I want this month yet, more one mic. This setup has me helped very much.

Comment by Arthur Skudra on November 20, 2012 at 2:55pm

Hi Stephen, You might want to check out the iSEMcon mics that are available at the Rational Acoustics webstore.

Comment by Stephen Kamin on November 20, 2012 at 1:11pm

ANyone using the Smaart VSL in Presonus 1.7? any suggestions on a mid cost measurement Mic...

Comment by Chicco Hiranandani on May 7, 2012 at 4:06am

Jamie Anderson in Dubai for the first Middle East SMAART course! :)

Comment by John Elliot on December 5, 2011 at 3:05pm

Study the Smaart 6 pdf help file, wealth of information there. Should have been bundled with your install.

Comment by Steve Curwick on December 5, 2011 at 1:20pm
I have smart 6. Not quite a total noob. It would be great to see a step by step example of use other than a expensive RTA.

Members (106)


© 2016   Created by Front of House Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service