"This post popping up reminded me of something I noticed the other day.  I was looking at the specs for the Crown Macro-Tech i-series amps.  if you look closely you'll notice that the output gets less with lower impedance…"

"It's also fun to see xomeone getting reflections into a mic from the brim of a hat causing feedback and looking stumped as to why."

"This has sort of been said but this is a little twist in thinking.  I mix from a function point of view.  With 3 guitars what is the function of each.  let's say the Acoustic (which by itself can take up from about 100 Hz to 20k)…"

"I have schemos for all things Peavey from about the 80's.  I could scan and post a few things.  "

"If the amp is in the red then it doesn't have enough output power for the application.  That doesn't mean the amp is inferior or doesn't sound as good as another."

"I have been doing a neat little technique that I thought I would share.  I have been ducking my reverb return using the reverb send as the key input.  I know it isn't rocket science and has been done in the studio for years but I…"

"ah got it.  I have never even put my hands on one of those.  In 1976 I was 8 years old.  So, go figure."

"A couple things I would check are the basics of solder joints and ribbon cable connections.  Next I would check to see if the coupling capacitors are good and the right values.  Coupling caps that are too small in their value (10uF rather…"

"Navy bands have been using Avioms since they came out with alot of success.  The key is to give a base stereo "house" mix complete with reverb for them to start with.  Then add whatever the performers need on top of that on the…"

"I have a degree in trumpet performance and played for the Navy for about 10 years before I got behind the console full time.  I now am the electronics repair guy for the Navy Music Program.  I started truly running sound in the Navy at…"